Engineering Students Study Material. CLICK ON

JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Notification, Exam Dates, Admit Card, Exam Pattern, Counselling

JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020
Exam Coming Up

JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Exam - Dates, Registration, Eligibility, Syllabus, Exam Pattern

Jamia Millia Islamia Entrance Exam for M.Tech. (Control and Instrumentation System) 2020 or JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 is the entrance examination for admission to M.Tech. (Control and Instrumentation Systems). JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 is conducted by Jamia Millia Islamia University.

JMI Entrance Exam M.Tech. (Control and Instrumentation System) for the year 2020 has been announced by Jamia Millia Islamia University and will be held on 20/11/2020. The application forms will be available from 21/02/2020 till 14/09/2020. The exam is in written mode. The duration of the exam will be 90 minutes. It is being conducted in English and Hindi languages. The result date will be announced later.

For Course(s)


For University(s)

To get all details about JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Download Brochure

JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Conducting Body

Jamia Millia Islamia University

JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Eligibility Criteria

Eligibility Criteria

Educational Qualifications:

  • Bachelor Degree in Electrical, Instrumentation and Control or Electronics and Communication Engineering with not less than 60% marks in an absolute system or a minimum grade of 6.75 on a 10 point scale.

Qualifying marks:

All Categories60% Marks


JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Important Dates

Events Start Date Last Date
Application Form 21/02/2020 14/09/2020
JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Exam Date Offline Dates
  • 20/11/2020
  • To get all details about JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Download Brochure

    JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Prospectus

    JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Application Form

    Application Form Fee

    Application FeeRs. 700/- 

    Application Form Filling Instructions

    General Instructions for filling up the Application Form

    Students applying for the JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 have to fill up the application form on the official site.

    A student can submit the application for only once; multiple forms will be rejected.

    The submission is ONLINE only.

    Requirements to be readied before you start filling up the Application Form of JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020

    • PC or a Laptop with Internet connectivity
    • Qualification details
    • Soft copy of candidate’s coloured passport size photograph (Maximum 100KB in size) in JPG / JPEG format with White Background.
    • Soft copy of candidate’s signature (Maximum 100 KB in size) in JPG / JPEG format.
    • Functional e-mail Id as all communication are made through email; Parents email id is recommended.
    • Mobile number as all information is sent through SMS too. Parents phone number can be used.
    • For online payments, usually a valid debit or credit card as well as Net B facility, Credit Cards & Debit Cards Service is a must.
    • Printer is required for keeping hard copies; if there is no printer, one can save the printouts, transfer them on to a pen drive and get it printed from a cyber-café.
    • It is recommended to download the information Bulletin Brochure and read it carefully so that you understand various requirements to fill up the form.

    Candidates are not allowed to make any correction at a later stage after submission of an application. O correction is entertained via post, fax, email or by hand.

    The Usual Steps in filling up the Online Application Form of the JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020

    Step-1: Students have register for Online Application Form. A login and Password are created.

    Step-2: Student has to Complete the Application Form and its various sections

    Step-3: Required documents in the form of Scanned Images of Candidate’s Photograph, Candidate’s Signature.

    Step-4: Payments have to be made by Net Banking, Credit Cards, Debit Cards & Demand Draft

    Important Instructions Application Process

    • All steps have to be completed before you can submit the form.
    • Incomplete forms will be rejected.
    • No correspondence is allowed on incomplete submission of form.
    • No request of remitted fees is entertained
    • Please keep visiting the JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 official website for latest updates.

    JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Syllabus

    Syllabus for JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020

    AC and DC Network Analysis

    Nodal and Mesh Analysis, Theorems: Superposition, Thevenin, Norton, Maximum Power Transfer, Substitution, Compensation, Millman and Tellegan. Graph theory.Steady State and Transient Response of Networks. Resonance. Basic Filters. Two Port Networks, Three Phase Circuits. Signals and Systems, Fourier Series representation of Continuous Periodic Signals, Sampling Theorem, Fourier, Laplace and Z-Transforms.

    Electrical Machines

    Single Phase Transformer; Equivalent Circuit, Phasor Diagram, Tests, Regulation and Efficiency. Three Phase Transformer; Connections, Parallel Operation. Auto transformer. Energy Conversion Principles. DC machines; Types, Windings, Characteristics, Armature Reaction and Commutation, Starting and Speed Control. AC Machines: Three Phase Induction Motors- Principles, Types, Operation, Characteristics, Starting and Speed Control. Single Phase Induction Motors with Operating Characteristics. Synchronous Machine; Performace, Regulation and Parallel Operation of Generators. Servo and Stepper Motor.

    Power Systems

    Power Generation Concepts. Transmission Line Models and Performance. Insulation, Corona and Radio Interference. Distribution Systems. Per unit Quantities. Bus Impedance and Admittance Matrices. Load Flow. Voltage Control. Power Factor Correction. Economic Operation. Symmetrical Components. Fault Analysis. Principles of Over Current, Differential and Distance Protection. Relays and Circuit Breakers. System Stability Concept. Swing Curves and Equal Area Criteria.

    Control and Measurement

    Mathematical Modelling of Physical Systems. Principles of Feedback. Transfer Function. Block Diagrams. Signal Flow Graphs. Time Domain Analysis of Control System. Steady State Errors. Stability Concepts. Routh-Hurwitz’s stability criterion. Routh and Nyquist Techniques. Bodes Plot. Root-Locus Plots. Polar Plot. Design of Proportional, Integral, Derivative, PI, PID Controllers. Lag, Lead and Lead-Lag Compensation. Steady State Model. State Transition Matrix. Controllability and Observalibility. Power measurement in Single Phase and Three Phase Circuits. Classification of Energymeters. Power Factor Meter. Transducers.

    Power Electronics and Drives

    Characteristics and Operation of Power Diodes, MOSFET, IGBT and Thyristor Family: SCR, TRIACS, GTO. Triggering Circuits. Principles and Operation of Single Phase; Half Wave, Full Wave Converters and Choppers. Basic Concepts of Adjustable Speed DC and AC Drives.


    Subjects


    The Subjects included for JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 are:

    • AC and DC Network Analysis
    • Electrical Machines
    • Power Systems
    • Control and Measurement
    • Power Electronics and Drives

    Syllabus Link: View/Download

    JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Admit Card

    Admit Card Download Url

    Link: View/Download

    JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Exam Day Instructions


    Offline Dates

    • 20/11/2020

    Examination Day Instructions

    Preparation for the Exam Day

    • The Admit card should be downloaded and printed immediately.
    • A few copies of the Admit Card should be kept in reserve as these are also used at the time of admission and counselling.
    • Photo to be fixed on the admit card, if required.
    • Photo to be fixed on the admit card, if required
    • Copy of the photo may be required to be taken to the Test Centre
    • Stationary related articles as mentioned should be kept ready.
    • Dress related details will also be provided in
    • the prospectus as well as with the admit card and should be followed. 
    • Items not to be taken to the Exam centre or barred should be noted.

    Before entering the Exam Centre

    • Try to reach the exam centre one hour prior to the time advised in the admit card.
    • Before leaving for the site, please have a hearty breakfast or light lunch depending on the session. Drink plenty of fluids; as in summers dehydration can set in affecting your performance in the exam.
    • Have a cookie or a chocolate just before entering the centre; this prevents hypoglycaemia and thus helps you stay alert longer improving your results.
    • If it is a busy centre, then don’t wait till last for the entry and security check.
    • Centre will not allow you to enter after the stipulated time of closing the doors.
    • Admission to the Exam Centre is with the Admit Card; no candidates shall be admitted to the test without the production of the Admit Card at the Test Centre.
    • Usually no bags are allowed.
    • No eatables are allowed.
    • No communication equipment such as mobile phones / pager/ wireless set, scanner, camera or any such electronic / digital gadget etc are allowed in the exam centre; carrying one will lead to disqualification.
    • Handbag / Carry bag/ Mobile phone / calculator /watch/any other electronic gadget or any paper (other than the Admit Card) shall not be allowed inside the Test Hall/Room and the University shall not be responsible for its safekeeping. If a candidate is found in possession of any such item during the Test, he/she would be deemed to have used unfair means and may lead to cancellation of his/her candidature.

    After entering the centre

    • Once candidates enter the centre, they should locate their designated hall and seat.
    • If mentioned, candidates will be hand frisked as well as photographed or video graphed before entering the centre
    • After all the formalities, candidates should enter the allotted hall and take the designated seat.
    • For Objective Type question papers, rough work is to be done in the space provided for this purpose. No rough work is allowed on the OMR Answer Sheet under any situation.
    • Questions have to be answered on the answer sheet only.
    • Copying, use of unfair means of any kind, talking, asking questions from other candidates or borrowing of material inside the Test Centre is strictly prohibited.
    • The candidates are to return their OMR answer-sheets and the question paper in full to the Centre Superintendent. Tearing or taking away of the question paper is not allowed failing which the candidates shall be disqualified from the entire Entrance Test.
    • Smoking is a not allowed.
    • Misbehaviour of any kind can lead to expulsion of the candidate.
    • Caught copying helping in copying will mean cancellation of the answer sheet/cancellation of the candidature.
    • Marking the answer sheet or question paper in any way will also lead to cancellation of the exam for that candidate.
    To get all details about JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Download Brochure

    JMI Entrance Exam M.Tech. (Control and Instrumentation System) 2020 Results


    Related Notifications View All

    Loading...

    Ask Your Question

    Characters 0/150

    Related News

    My Next Exam

    October 30, 2020

    Getting latest updates

    Getting latest updates


    Related Articles

    My Next Exam

    October 30, 2020

    Getting latest updates

    Getting latest updates

    Sign Up

     

     


    or

    Already A Member? Login here

    Download App

    App Store

    {"class":"offscreen","alt":"Google Play Store"}